Showing 65–80 of 124 results
Marking File
$1.50
Length: approx. 132MM
Weight: approx. 100 g
Material: Stainless steel
Finish: Dull mate
Handle: Cushion-Grip handle
New Hinge Pliers 2018
$14.14
It is used to give the soft bend to the hinge and connecting wire between
the hinge and eyewear glasses or chassis. It also works very well on the
Silhouette frames, metal eyewear glasses frames and acetate eyewear glasses
frames. The nylon jaw and soft rubber pads protect the color of the hinge,
Nose Pad Adjusting Pliers Combo Pad Arm pliers
$14.00
Nose pad and nose pad arm adjusting tool all in a single plier.
Specially designed jaws safely grab and adjust the nose pad and box.
The unique jaw tips securely pinch the interior and the exterior of the
pad arm to adjust its curvature
Nose Pad Arm Bending Pliers
$14.00
Put the curve back into bent pad arms in one squeeze.
The top jaw is concave and the opposing jaw is tapered to fit inside.
Pressing the padded arm between the pre-formed jaws quickly
creates the proper pad arm curve.
Length: approx. 132MM
Weight: approx. 100 g
Material:Stainless steel
Finish:Dull mate
Handle:Cushion Grip handle
Nose Pad Popping Pliers
$15.50
The quickest, easiest and cleanest way to remove old push-in nose pads from the pad box without putting pressure on or distorting the padded arm, or breaking your nails!
Nylon Eye wire Shaper Plier 24mm
$14.00
Forms the curvature of metal eye wires into conformance with the curvature of a lens
Non-Marking, replaceable nylon jaws
Length: approx. 132MM
Weight: approx. 100 g
Material: Stainless steel
Finish: Dull mate
Handle:Cushion-Grip handle
Nylon Eye wire Shaper Pliers 19 mm
$15.50
Nylon Eyewire Shaper 19 mm
With plastic jaws, small version
Nylon Liner Tweezers
$5.00
For easy threading of the 8-profile nylon liner into the upper or lower frame wire.
Oblique head end cutter
$14.00
Cuts nickel-silver screws and rivets
Design allows flush cuts in tight areas
Note: Does not cut stainless steel
Length: approx. 132MM
Weight: approx. 100 g
Material: Stainless steel
Finish: Dull mate
Handle: Cushion-Grip handle
Oval File
$1.50
Length: approx. 132MM
Weight: approx. 100 g
Material: Stainless steel
Finish: Dull mate
Handle: Cushion-Grip handle
PAD SCREW HOLDING TWEEZERS
$5.00
Stainless steel, the straight version with shaped tip,
to pick up pad screws, suitable to screw into the
first thread.
Parallel Action Narrow End Flush Cutting Pliers
$20.50
Cutting the excess length from rimless compression tubing is easy and safe with the 5mm wide head. Rounded jaws prevent scratching the lens. Not recommended
for use on metals.
Parallel Action Post pushing pliers
$21.00
Easily and safely extract the post and tubing from a compression rimless lens.
This simple to use tool combines tremendous pressure delicately and effortlessly
applied to gently push out the post and tubing from the holes. Will not mar frames.
Pins pivot easily to accommodate horizontal and vertical mounting systems.
Parallel Action Rimless Post Pulling Pliers
$21.00
Safely disengages the bridge and temple from compression rimless lenses.
Prevents lens breakage that results from the attempt to extract the post and
tubing by hand.
Parallel jaw pliers
$21.50
Jaws taper from 6.0mm to 1.5mm diameter along the jaws of 22mm length
Overall size: 5.5”- 140 mm.
Weight: 4.30oz. ~ 128g.
Parallel jaw pliers
$22.50
These imported 5-1/2" long parallel pliers have one jaw that is a tapered round and the other flat. All the surfaces are smooth.
The tapered round jaw tapers from 6mm to 1.6mm and is 22mm long. Maximum jaw opening is 3/8", just a little over 9mm. The jaws are 5/16" (7.5mm)